Development of woodworking saw blade
The development of large-scale woodworking cutting operation follows the pace of economic and social development, and higher production efficiency needs better performance. Especially for the cutting operation of high density and high hardness boards such as particleboard, anti Beite board and calcium sulfate board, the traditional cemented carbide saw blade has limitations. In terms of service life and cutting consistency, the operation efficiency can not meet the requirements of large-scale woodworking operation, so higher performance woodworking saw blade is needed to solve these problems.
Diamond saw blade is a cutting tool, which is widely used in the processing of hard and brittle materials such as concrete, refractory, stone, ceramics and so on. Diamond saw blade is mainly composed of two parts; Matrix and cutter head. The matrix is the main supporting part of the bonded cutter head, and the cutter head is the part that cuts in the process of use. The cutter head will be continuously consumed in use, while the matrix will not. The reason why the cutter head can cut is because it contains diamond. Diamond, as the hardest material at present, friction cuts the processed object in the cutter head. The diamond particles are wrapped in the cutter head by metal.
PCD composite diamond saw blade has become the cutting tool of the hardest material and the leader of woodworking dry cutting tools. Its superhard performance and durability are the nemesis of woodworking materials. Diamond saw blade has a Vickers hardness of 10000hv, strong acid resistance, difficult passivation of the cutting edge, good one-time molding quality of processed wood, high wear resistance, and is more wear-resistant than cemented carbide. For the cutting and processing of particleboard, MDF, wood floor, veneer, etc., the continuous operation time can reach 300 ~ 400 hours, and the maximum service scrap time can reach 4000 hours / piece, compared with cemented carbide blade, The service life is longer, and the processing efficiency and processing accuracy meet the needs of the best quality. It is a smart choice for woodworking operations.
¡¼Return¡½ ¡¼Collection¡½ Hits£º2246
|